5 Best SprayPaint for Motorcycle Gas Tank

As a motorcyclist, keeping your motorcycle clean might be common for you. However, cleaning works for the first few years, then your bike starts to decolor. For sure its cylinders and other parts remain the same but the gas tank is the one that is affected and people can guess if your bike is new or old simply by staring at the gas tank.

But there is a solution, that is use a spray paint to make it new again. However, the paint should be of high quality. That is what is described in this article.

What is Motorcycle Tank Spray Paint?

It is a kind of paint that can be sprayed onto the surface. It mostly comes in aerosol cans and they are usually used to make surfaces look new, such as car gas tanks or motorcycle gas tank.

What Makes a Spray Paint Good?

The best quality for spray paints should be able to meet certain requirements.

  • They should cover effectively and quickly, not leave unsightly streaks or blotches which is sometimes seen on cheaper paint products. If they have any blemishes it will be visible to the eye.
  • The color of the spray paints are usually bright and vibrant with high chroma index so that if you look at your bike from afar it will stand out.
  • They should dry quickly and not leave any residue behind, because if they do the paint might peel off or chip away after a short period of time.

Best Spray Paints for Motorcycle Gas Tank:

Here are 5 Spray Paints for Motorcycle Gas Tank which are high quality and dry quickly without leaving any blemishes:

1. Dupli-Color Epae10000 Premium Acrylic Enamel Spray Paint

Dupli-Color® brings your projects to life with Premium Acrylic Enamel. This paint and primer in one product saves time and money with its patented Fusion® Plastic Adhesion Technology.

Featuring maximum rust protection, minimum odor, quick dry to touch in 25 minutes / handle in 2 hours and no priming required. Dupli-Color Premium Acrylic Enamel dries to a beautiful, durable finish that will last for years. That makes the paint great for bike gas tanks.

* As an Amazon Associate I earn from qualifying purchases.

2. Rust-Oleum Automotive Engine Enamel Spray Paint

Rust-Oleum Automotive Engine Enamel provides long lasting rust protection for your car, truck or motorcycle. It’s also ideal for use on a variety of metal surfaces including trailers and farm equipment.

This high-gloss finish offers outstanding paint coverage and a durable, protective coating that resists heat up to 500°F. The ergonomic comfort tip sprays any angle, even upside down. The formula stops rust on contact and is gas and oil resistant.

  • Durable, long-lasting finish
  • Resists Oil, gas, grease, rust, salt, humidity and solvents
  • Available in industry standard colors
  • Model number: 248944

* As an Amazon Associate I earn from qualifying purchases.

3.  Spraymax 2K Clear

Spraymax 2K Clear Coat is a waterborne acrylic based spray lacquer with a very good flow and high gloss. It is ideally suited for large surfaces in the automotive industry as well as the metal-processing and marine industries.

Spraymax 2K Clear Coat offers excellent resistance to abrasion, scratching and weathering, and is therefore suitable for all surfaces that are exposed to high mechanical stress or aggressive environmental influences (e.g. rain).

  • 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish
  • Easy to use aerosol. Activate, shake and spray. Unique nozzle delivers spray gun results
  • Dries to a high gloss finish. Excellent weather and chemical resistance
  • For use over all basecoats
  • Manufacture date on can

* As an Amazon Associate I earn from qualifying purchases.

4. PJ1 Gloss Black Epoxy Spray Paint

PJ1 has been the go-to for many motorcycle riders who need industrial strength metal paint. The glossy finish is great for those who live in places where conditions are tough on their bikes.

PJ1 doesn’t chip or scratch easily, saving time and money between trips to a professional so you can spend more time riding! The best part about this product? It’s easy to wash off with water – just don’t forget to use soap!

  • PJ1 Fast Black Epoxy Paint provides a high gloss, porcelain-hard finish for all motorcycle frames and other metal components that require a factory-like durable finish
  • PJ1 Gloss Clear Epoxy Paint is easy to apply and is both chip and scratch resistant
  • Guards against rust and corrosion
  • Dirt and mud wash right off with soap and water
  • For increased protection and an even higher luster gloss topcoat with PJ1 Epoxy Gloss Clear

* As an Amazon Associate I earn from qualifying purchases.

5. POR-15 Top Coat Gloss Black Spray Paint

Paint your metal. POR-15 Top Coat Gloss Black Spray Paint helps you to paint your metal in a sleek and stylish black gloss, that is UV resistant!

You don’t need primer or undercoat either as this product was made for DTM rust prevention. This is even packaged with a trigger nozzle which will make painting that much easier!

  • Direct to Metal (DTM) Rust Preventive Paint
  • No Need for Primer or Undercoat
  • Use over POR-15 Rust Preventive
  • UV resistant

* As an Amazon Associate I earn from qualifying purchases.

Why and How to Paint a Motorcycle Gas Tank?

Taking care of your motorcycle isn’t only about tuning it up. Sometimes, you have to do more than just riding — and painting is one of those things. While the job may seem daunting, especially if you’re a beginner, painting a gas tank follows simple steps that can be easily achieved with the right materials and equipment.

Before you decide to paint your motorcycle you should remember that a motorcycle gas tank is a tough thing to paint — it’s not as simple as slapping a coat of paint on a metal box.

Here are some of the tools that you need to paint a motorcycle gas tank:

1. Sanding block along with sandpaper

2. Spray paint primer

3. Paint thinner

4. Spray paint clear coat (after reading this article you may know these by now).

Other than that, you may find this video helpful in painting your bike’s gas tank.

Some Frequently Asked Questions about Painting Motorcycle Gas Tank:

Here are some questions and answers to help you understand more about how to paint your motorcycle’s gas tank and what are some good tools to use for this:

What is difference between Aerosol Cans vs Spray Guns for Painting Motorcycle Gas Tank:

Every motorcycle enthusiast should go to the hardware store and buy a can of paint, but which one? Aerosols are fast-drying cans that allow you to cover large areas quickly. If painting something like your gas tank or fender is too big for an aerosol, then it would be better if you use spray guns instead because they will give a more refined finish with less overspray on other parts of your bike.

Aerosol paints have been around since the 1960s when scientists developed them as reliable alternatives in places where there was no electricity available; however today we now know how powerful these quick drying sprays really are!

Source: https://aeda.org/en/aerosol/history-of-aerosols/

What aerosol spray paint is gas resistant?

Engine enamel spray cans are made with a special coating which protects them from damage by gasoline.

The double-coated protective layer prevents the exterior of the can from being damaged, even when exposed to flammable liquids like paint thinners or gas stations.

Conclusion:

So what did you learn from this article about best spray paints for motorcycle gas tank? If you use high-quality spray paint, your bike can look new again! Of course, there are a few things to keep in mind if you want to avoid problems like overspray or uneven coverage. But with the right tools and materials, it’s possible to give your bike a complete makeover without spending more than one hundred dollars on a new fuel tank. I hope that helped clear up some confusion around how these products work. If not, please let me know in the comments below!

Leave a Comment